From March 20 to 22, 2026, TAXSCO (Foshan Taxsco New Building Materials Co., Ltd.) exhibited at Booth 1C08 of the 2026 Foshan Ceiling, Wall & Sunshade Supply Chain Conference and Supporting Industries Expo, held at the Nanhai International Convention and Exhibition Center in Foshan, Guangdong, China. We focus on high-end custom shaped aluminum veneer curtain wall panels, with an integrated capability covering design, engineering detailing, production and installation support. Serving developers, architects and contractors on commercial projects, we used the show to present our aluminum ceiling systems, custom facade panels and full-project fabrication capabilities.
This recap covers what we displayed at Booth 1C08, the questions buyers asked most often, the supply-chain and design trends we observed on the show floor, and why overseas project teams continue to source architectural aluminum from the Foshan manufacturing cluster. If you are planning a commercial, hospitality, transportation or public-building project, the practical sourcing takeaways in the sections below should help you evaluate suppliers with more confidence.
The 2026 Expo at a Glance
Now in its fifth edition, the 2026 Foshan Ceiling, Wall & Sunshade Supply Chain Conference and Supporting Industries Expo ran for three days, from March 20 to 22, 2026, at the Nanhai International Convention and Exhibition Center in Foshan. According to the official show guide, the exhibition covered about 10,000 square meters and brought together nearly one hundred benchmark exhibitors. The displayed categories covered suspended ceilings, wall materials, lighting appliances, metal sunshade systems, aluminum profiles and pan-home building materials, drawing tens of thousands of targeted professional buyers from across China.
The expo ran in parallel with the 2026 320 International Happiness Day Home Festival in the same venue. The home festival combined offline display with online live streaming, with company hosts introducing Foshan quality products throughout the day. Under the coordinated arrangement, the two events shared buyer traffic and resources; the combined event attracted more than 12,000 professional visitors and recorded over RMB 500 million in intended cooperation value, according to the official event report. The home festival also gathered 87 leading pan-home furnishing and building-materials enterprises in five batches under the regional industry brand known as Home Is Built with Foshan Quality. Summit sessions during the show examined integrated ceiling-wall-cabinet solutions, whole-home customization, prefabricated construction and AI-assisted precision marketing as industry directions. Visitor and deal figures quoted in this section refer to the combined expo and home festival unless stated otherwise.
What TAXSCO Presented at Booth 1C08
At Booth 1C08, TAXSCO presented the aluminum ceiling and facade solutions we supply for commercial interiors and building exteriors. Foshan Taxsco New Building Materials focuses on high-end custom shaped aluminum veneer curtain wall panels, integrating design, engineering detailing, production and installation support into one service, and applies precision craftsmanship with innovative solutions to deliver quality architectural projects. Visitors could review standard product series side by side with custom options, and our team walked architects, contractors and distributors through design, detailing, fabrication and order-review steps.
Aluminum ceiling systems.
We presented lay-in and clip-in panels, U-shape and C/S-shape strip ceilings, grid ceilings, perforated aluminum veneer and honeycomb panels, together with our new-design ceiling series, including star-matrix dot ceilings, sky-wing ribbon ceilings, dragon-scale ceilings, island-shaped mesh ceilings, slant-inclined panel ceilings and flora pergola ceilings. You can browse the full range on our ceiling systems page.
Custom shaped aluminum veneer curtain wall panels.
The booth also featured our core facade line: solid aluminum veneer, perforated panels, curved panels, carved panels, metal mesh panels and shaped feature panels for building exteriors and feature walls. These panels can be cut, bent, perforated, curved and finished to project-specific drawings rather than a fixed catalog. Our architectural facade system page summarizes the standard and custom facade options available.
Selected representative projects.
Our booth materials referenced completed projects delivered under the same design-to-installation workflow: the mesh aluminum panel facade for South China University of Technology; a sales center building in Baghdad, Iraq; and a communications facility in Gaoming, Foshan. Further completed projects, including Middle East and Southeast Asian references, are listed on our engineering projects page.
Customization support (OEM / ODM).
Every system above can be adapted to the project’s dimensions, alloy gauge, perforation pattern and finish, including PVDF coating, powder coating, wood-grain transfer and custom RAL colors. Our engineering team reviews shop drawings, prepares sample boards for approval, and coordinates numbered packaging and delivery for site installation.
Island-shaped mesh ceiling installed overhead at Booth 1C08.
As a live installation, our island-shaped mesh ceiling system was mounted directly above the booth, so visitors could see a real ceiling application rather than flat sample boards. The overhead display combined red, blue and gold expanded mesh panels in several mesh patterns and opening sizes, arranged in separate bays across the ceiling; the Taxsco brand panel was positioned at the center, and spotlights on the overhead truss showed how the mesh admits light while defining the ceiling zone. The photos below show the overhead mesh ceiling from the booth floor and a close view of the colored mesh panels.
Figure 1. Island-shaped mesh ceiling installed overhead at TAXSCO Booth 1C08, with red, blue and gold mesh panels above the booth.
Figure 2. Close-up of the orange island-shaped mesh ceiling panel above the booth.
The Questions Buyers Asked Most at Booth 1C08
Questions at an industry show are often the clearest signal of what buyers need to compare before choosing a supplier. The four questions below came up repeatedly during the three days. Answers on order quantity, lead time and warranty should be finalized with the exact position quoted by the sales team before publication.
Can you customize panel dimensions, perforation patterns and colors to match our design?
Yes. Beyond standard modular sizes, we fabricate ceiling and facade panels to the dimensions and patterns shown in approved drawings. Perforation layouts, panel widths, joint spacing and finish colors can all be adjusted, and a physical sample board is approved before mass production begins.
What are the minimum order quantity and lead time for a commercial project?
For our standard panel series, the order threshold is low and there is no fixed minimum order quantity. For custom-shaped, perforated or special-finish panels, which are made to project-specific requirements, the lead time depends on the time needed to review and confirm the drawings, as well as the packaging and shipping method arranged for the order. Our team confirms the production schedule after the drawings and samples are approved.
Can one manufacturer supply both the ceiling system and the wall or facade panels?
Yes. TAXSCO supplies ceiling systems and aluminum facade / wall panels from the same factory, which lets buyers coordinate materials, finishes and delivery schedules through one technical contact. Matching ceiling and facade selections also keeps the visual language consistent across interior and exterior spaces.
Which finishes perform best in hot, humid or coastal climates?
For exterior and coastal applications, PVDF fluorocarbon coating offers stronger color retention and corrosion resistance; powder coating is commonly specified for interior ceilings. Alloy selection, panel thickness and surface treatment are matched to the exposure conditions of the project.
Supply-Chain and Design Trends We Observed at the Show
Walking the halls and joining the summit discussions, four directions stood out for buyers sourcing architectural aluminum products.
Integrated ceiling-and-wall solutions.
Buyers no longer treat ceilings, walls and facade panels as separate purchases. Demand is moving toward coordinated ceiling and wall systems that share design language, finish standards and installation schedules, especially for retail centers, hotels and mixed-use developments.
Bespoke and parametric shapes keep gaining ground.
Straight panels remain the baseline, but more projects request curved, slanted, ribbon, mesh and feature configurations. Suppliers that can translate complex design drawings into fabricated panels, rather than only selling standard profiles, are better positioned for architectural commissions.
Prefabricated, modular installation.
Contractors continue to look for systems that pre-fabricate cleanly in the factory and install quickly on site, reducing site waste and fitting time. Modular ceiling grids, pre-numbered panels and installation guidance are becoming standard expectations rather than add-on services.
Durable finishes and online supplier comparison.
Finish durability, color stability and maintenance are central to purchase decisions in hot-climate and coastal markets. The association also framed 2026 as the start of an AI-assisted, precision-matched marketing era for the industry: buyers increasingly review supplier capabilities online, compare finish options and request quotations before or between trade shows.
Why Sourcing Architectural Aluminum from the Foshan Cluster Works for Overseas Projects
Foshan and the wider Pearl River Delta concentrate aluminum raw materials, surface treatment lines, CNC processing, accessory suppliers and export logistics in one region. For an overseas buyer, this cluster makes it practical to source both ceiling systems and facade panels from factory-direct manufacturers like TAXSCO, without adding a middle layer of trading margin.
For our international team, the practical advantages are straightforward: engineering support from the initial drawings through sample approval; OEM and ODM production for custom shapes, sizes and colors; controlled quality inspection before packaging; and project-specific delivery coordination. Recent representative work includes the mesh aluminum panel facade for South China University of Technology, a sales center building in Baghdad, Iraq, and a communications facility in Gaoming, Foshan. Our completed project portfolio also covers airport terminals, commercial sales centers, fitness centers, religious buildings, restaurants and corporate facades in the Middle East, Southeast Asia and domestic China. You can review completed projects on our engineering projects page and compare the solution process on our about-us page.
Whether your project is a hotel lobby, a retail sales center, a transportation terminal, a mosque, an office tower or a public building, the Foshan supply chain can support customized ceiling and facade production at a scale that suits both single buildings and phased development programs.
Continue the Conversation: Catalog, Samples or a Quotation
If you met our team at the 2026 Foshan expo, or learned about TAXSCO after the show, the next step is straightforward. Share your drawings, project dimensions, finish requirements and target timeline, and our team will prepare a product recommendation, sample board or project quotation.
- Browse our ceiling systems: https://taxsco.com/new-ceiling-systems/
- Review our facade and curtain wall solutions: https://taxsco.com/architectural-facade-system/
- See completed engineering projects: https://taxsco.com/engineering-projects/
- Request a catalog, samples or a custom quotation: https://taxsco.com/contact-us/
Frequently Asked Questions
Did TAXSCO exhibit at the 2026 Foshan Ceiling, Wall & Sunshade Expo?
Yes. TAXSCO exhibited at Booth 1C08 of the 2026 Foshan Ceiling, Wall & Sunshade Supply Chain Conference and Supporting Industries Expo, held from March 20 to 22, 2026 at the Nanhai International Convention and Exhibition Center in Foshan, China. Our booth presented aluminum ceiling systems, custom shaped aluminum veneer facade panels and OEM/ODM customization options.·
What aluminum ceiling and facade products does TAXSCO manufacture?
TAXSCO manufactures lay-in and clip-in aluminum panels, strip and linear (baffle) ceilings, grid ceilings, perforated veneer, honeycomb panels and a range of feature ceiling designs. Our facade line covers high-end custom shaped aluminum veneer curtain wall panels, perforated, curved, carved and mesh panels for commercial interiors and exteriors.
Can TAXSCO produce custom ceiling and facade panels for commercial projects?
Yes. We offer OEM and ODM fabrication of custom panel shapes, dimensions, perforation patterns, alloys and finishes, including PVDF and powder coating and custom colors. Our integrated workflow covers design, engineering detailing, production and installation support; engineering drawings are reviewed, samples approved, and production carried out to the approved project specifications.
Which regions does TAXSCO export to?
TAXSCO supplies developers, architects, contractors and distributors on commercial projects, with completed references in the Middle East (including Iraq), Southeast Asia and domestic China, and capacity to serve new markets across Africa, the Middle East and other regions on request.
What information is needed to prepare a quotation?
To prepare an accurate quotation, please share the project type and location, ceiling or facade layout drawings, panel dimensions or quantities, preferred system type, finish requirements, and any fire, acoustic or environmental specifications. Our team will then confirm options, lead time and sample arrangements.
How can overseas buyers request a catalog or samples?
Contact TAXSCO through the website contact page with your project details and the product series you are interested in. We can send a product catalog, finish and color boards, and sample panels where project requirements justify sample production.